PS4Arduino

This library will allow you to turn your Arduino into a controller fully compatible with PS4!

IMPORTANT: You must install the PS4Arduino-AVR core for the library to work. Instructions here.
Once installed, you need to select "____ as PS4 controller" as the board.

How to use

Really simple! This library includes 6 functions to cover all inputs:

• PS4controller.begin(): call this to initialize the library.

• PS4controller.setButton(button, state): sets the state of a button. It takes two parameters: the button, which can be one of the following:

  • TRIANGLE
  • CIRCLE
  • CROSS
  • SQUARE
  • SHARE
  • OPTIONS
  • PS
  • L1
  • L2
  • L3
  • R1
  • R2
  • R3
  • TOUCHPAD

  and the state, which can be either true/1 or false/0.

• PS4controller.setDpad(direction): sets the direction of the dpad. Takes 1 parameter, which can be:

  • DPAD_N
  • DPAD_NE
  • DPAD_E
  • DPAD_SE
  • DPAD_S
  • DPAD_SW
  • DPAD_W
  • DPAD_NW
  • DPAD_RELEASED

  (the letters stand for the cardinal directions, e.g. NE is the top and right buttons pressed simultaneously).

• PS4controller.setTrigger(trigger, value): this is the function to use if you want to press L2/R2 but not fully (useful for throttle/braking). Takes 2 parameters: the trigger (LEFT/RIGHT) and a value from 0 to 255 (0 is fully unpressed and 255 is fully pressed).

• PS4controller.setJoystick(joystick, axis, value): sets the value of a joystick axis. Takes three parameters: the joystick (LEFT/RIGHT), the axis (X/Y) and a value from 0 to 255. 128 is the middle.

• PS4controller.maintainConnection(): You must call this frequently (e.g. once per loop) to prevent the board from being disconnected from your PS4.

And that's about it! You can take a look at this example for further reference.

Currently supported boards:

• Arduino Leonardo
• Arduino Leonardo ETH
• Arduino Micro
• Arduino Esplora