General Lumacode profile adjustment question

[CrossBow777]

Is it possible to add additional granular adjustment settings to the current profile setups?

As an example, it has become known recently that some of the more recent 2600 games from Champ Games are using all of the playfield screen including areas normally in the overscan on a CRT. Because of this, it is required to adjust the vertical offset on some games. But it seems that the adjustments we are allowed to have only allow for adjustements of 2 digits at a time in some cases or on some profiles. It would nice if we could adjust in full numeral increments.

Another example of this is the Intellivison profile. The default Horizontal offset cuts off too much on the right hand side. But the next adjustment over to move the image over is 2 whole digits and now that ends up nearly cutting off too much on the left etc. It would be nice if these adjustments could be more incremental to really dial in and center things better on these profiles?

[c0pperdragon]

I am afraid I cannot help with anything related to the RGBtoHDMI software. In the recent years this was completely maintained by Ian, but as you may be aware he has no longer responded to issue posts since last October and no further progess on the software was done since May of last year. It could well be that the version "Beta 66" is everything we will ever get.

[CrossBow777]

Ugh...I had a feeling that might be the answer. I just find is strange that no further updates to the core software seem to be something they are interested in? It is a very successful platform as far as I know and at least for me, the Lumacode specific portion of it has made playing my old consoles a better experience than even the RGB upgraded ones at this point.

Also, it is strange in that the various profiles all have different adjustment numbers and increments they can adjust between them? So I know something like this much be possible. Goes in line with why there isn't a dedicated 4:3 sharp interpolation mode and only the soft modes? Because the sharp 4:3 that shows up briefly when you first choose the 4:3 option looks great! But is only because the smooth/soft filter hasn't applied itself yet as it does automatically when exiting the menus at that point.